135 x 135 x 38 mm

– Material for aluminium housing and impeller; housing with grounding lug for screw M4 x 8
(Torx). 48 V version incl. screws.
– Fully integrated electronic commutation.
– Protected against reverse polarity and locking.
– Connection via single strands AWG 22, TR 64, bared and tin-plated.
– Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor.
– Mass: 650 g.

SolidComponents^TM

127 x 127 x 38 mm

– Optional Vario-Pro: Highly adaptable software configuration of the fan enables
a tailor-made solution to the specific requirements of your applications.

– Material: fibreglass-reinforced plastic. Impeller PA, housing PBT.
– Fully integrated electronic commutation.
– Protected against reverse polarity and locking.
– Connection via single strands AWG 22, TR 64. Bared and tin-plated.
– Air exhau

SolidComponents^TM

119 x 119 x 38 mm

– Very rigid compression curve for high air flow at high back pressure.
– Low operating noise level at high back pressure.


– Available as standard with PWM control input and speed signal, additional inputs and outputs on
request. 3-phase fan drive with high degree of running smoothness.
– Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for
screw M4 x

SolidComponents^TM

119 x 119 x 38 mm

– Very rigid compression curve for high air flow at high back pressure.
– Low operating noise level at high back pressure.


– Optional Vario-Pro: Highly adaptable software configuration of the fan enables
a tailor-made solution to the specific requirements of your applications.
– Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug
for screw M4 x 8 (Torx).

SolidComponents^TM

119 x 119 x 32 mm

– Open loop speed control by means of external or internal temperature sensor.
– Automatic speed adjustment according to cooling requirements.

– Material: fibreglass-reinforced plastic. Impeller PA, housing PBT.
– Fully integrated electronic commutation.
– Protected against reverse polarity and locking.
– Connection via single strands AWG 22, TR 64. Bared and tin-plated.
– Air exhaust over stru

SolidComponents^TM

119 x 119 x 32 mm

– Ball bearings and sleeve bearings available.
– Optional Vario-Pro: Highly adaptable software configuration of the fan enables
a tailor-made solution to the specific requirements of your applications

– Material: fibreglass-reinforced plastic. Impeller PA, housing PBT.
– Fully integrated electronic commutation.
– Protected against reverse polarity and locking.
– Connection via single strands AW

SolidComponents^TM

80 x 80 x 25 mm

– Highly stable characteristic curve for high air flow at high back pressure.
– Motor with very low structure-borne noise properties.
– Innovative impeller with winglets for low noise.


– Extremely quiet Sintec sleeve bearing / ball bearing.
– Models with PWM control and open collector speed signal.
– Material: fibreglass-reinforced plastic. Impeller PA, housing PBT.
– Fully integrated electr

SolidComponents^TM

60 x 60 x 25 mm

– Open loop speed control by means of external or internal temperature sensor.
– Automatic speed adjustment according to cooling requirements.

– Material: fibreglass-reinforced plastic. Impeller PA, housing PBT.
– Fully integrated electronic commutation.
– Protected against reverse polarity and locking.
– Connection via single strands AWG 22, TR 64. Bared and tin-plated.
– Air exhaust over struts

SolidComponents^TM

60 x 60 x 25 mm

– Ball bearings and sleeve bearings available.
– Some models suitable for use at high ambient temperatures up to 85 °C.

– Material: fibreglass-reinforced plastic. Impeller PA, housing PBT.
– Fully integrated electronic commutation.
– Protected against reverse polarity and locking.
– Connection via single strands AWG 22, TR 64. Bared and tin-plated.
– Air exhaust over struts. Direction of rotation

SolidComponents^TM

60 x 60 x 25 mm

– Very rigid compression curve for high air flow at high back pressure.
– Motor with very low structure-borne noise.
– Control inputs, alarm and speed signals available on request.

– Developed for applications with stringent environmental requirements.
– Material: fibreglass-reinforced plastic. Impeller PA, housing PBT.
– Fully integrated electronic commutation.
– Protected against reverse polari

SolidComponents^TM