REV Robotics

Modèles deREV Robotics CatalogMotion
Résultats 41-50 sur 120
Résultats par page:
Numéro de pièce
Fournisseur
Description
The 5mm Hex to 8mm Round Bearing Insert, when paired with the 8mm x 12mm x 3.5mm Flanged Bearing (REV-49-1559), allows you to support 5mm hex shaft with a robust low friction bearing. It includes a pair of locking tabs that secure the insert to the bearing.
Catégorie
Configurations?
Non
Téléchargements
29
Ajouté le
29 juin, 2020
Numéro de pièce
Fournisseur
Description
This bearing pillow block bracket is used with the REV 15mm Extrusion System. The hex center hole fits REV Robotics 5mm hex shaft.
Catégorie
Configurations?
Non
Téléchargements
76
Ajouté le
24 déc., 2019
Numéro de pièce
Fournisseur
Description
This bearing pillow block bracket is used with the REV 15mm Extrusion System. The 9mm center hole is use with either the REV Robotics Long Through-bore Bearing (REV-41-1329) or the End Cap Bearing (REV-41-1322) to provide a low friction shaft support.
Catégorie
Configurations?
Non
Téléchargements
106
Ajouté le
24 déc., 2019
Numéro de pièce
Fournisseur
Description
The long through-bore bearings are used with the 5mm hex shaft recommend for the REV 15mm Extrusion System to provide a low friction rotating shaft support.
Catégorie
Configurations?
Non
Téléchargements
89
Ajouté le
24 déc., 2019
Numéro de pièce
Fournisseur
Description
The short through-bore bearings are used with the 5mm hex shaft recommend for the REV 15mm Extrusion System to provide a low friction rotating shaft support.
Catégorie
Configurations?
Non
Téléchargements
82
Ajouté le
24 déc., 2019
Numéro de pièce
Fournisseur
Description
The REV End Cap Bearing is used with the 5mm hex shaft recommended for the REV 15mm Extrusion System to provide a low friction rotating shaft support.
Catégorie
Configurations?
Non
Téléchargements
29
Ajouté le
24 déc., 2019
Numéro de pièce
Fournisseur
Description
Omni wheels have rollers mounted around the outside which passively rotate at 90 degrees to the powered direction of the wheel. Omni wheels can be used to make is easier to turn with skid steer robots or can be used to make more advanced robot drive trains like kiwi drive.
Catégorie
Configurations?
Non
Téléchargements
181
Ajouté le
24 déc., 2019
Numéro de pièce
Fournisseur
Description
Omni wheels have rollers mounted around the outside which passively rotate at 90 degrees to the powered direction of the wheel. Omni wheels can be used to make is easier to turn with skid steer robots or can be used to make more advanced robot drive trains like kiwi drive.
Catégorie
Configurations?
Non
Téléchargements
156
Ajouté le
24 déc., 2019
Numéro de pièce
Fournisseur
Description
REV Grip Wheels are wider than our standard wheels, giving teams more traction while still being lightweight and robust. This wheel is compatible with 5mm hex shaft, which completely eliminates the need for expensive hubs or using potentially unreliable set screws.
Catégorie
Configurations?
Non
Téléchargements
121
Ajouté le
24 déc., 2019
Numéro de pièce
Fournisseur
Description
The REV Robotics 90mm Traction Wheel which fits on a 5mm hex shaft is primarily intended for use with the REV 15mm Extrusion System.
Catégorie
Configurations?
Non
Téléchargements
80
Ajouté le
24 déc., 2019

A propos de

Robotics parts supplier dedicated to helping promote STEAM globally. Proud supplier of FIRST Global, FIRST Tech Challenge, and FIRST Robotics Competition.

Coordonnées du contact

Adresse:
1621 W Crosby Rd
Suite 104
Carrollton, 75006
Texas, United States
Téléphone: 8442552267
Courrier électronique:
site Web: www.revrobotics.com