Industrilås AB

Résultats 1-10 sur 32
< Page précédente1234Page suivante >
Résultats par page:
Fournisseur
Description
Adjustable roller cam that can be assembled on all Quarter-turn latches for combi cut-out including L-handles, T-handles and knobs. Provides 48 mm adjustability, between 4 – 52 mm for latches with 18 mm housing depth.

Optimisé par
SolidComponentsTM
Configurations?
Inconnu
Téléchargements
1
Ajouté le
2 juil., 2021
Fournisseur
Description
Adjustable cam that can be assembled on all Quarter-turn latches for combi cut-out including L-handles, T-handles and knobs. Provides 23mm adjustability, between 21,5 – 45 mm for latches with 18 mm housing depth.

Optimisé par
SolidComponentsTM
Configurations?
Inconnu
Téléchargements
0
Ajouté le
2 juil., 2021
Fournisseur
Description
Spring loaded latch for slam-latch action. Version for left hinged door is normally in 10 o'clock position and temporarily moves up to 11 o'clock position when pressed against the frame. 2-140a.

Optimisé par
SolidComponentsTM
Configurations?
Inconnu
Téléchargements
4
Ajouté le
7 avr., 2020
Fournisseur
Description
Finger pull and protective dust cover for standard quarter-turn latches with a collar diameter of 28 or 32 mm

Note:
Add 2 mm to the H-dimension to compensate for plate thickness.

MATERIAL:
Glass fibre reinforced polyamide (PA6), black.

If a IP65-product is used with products on catalogue page 2-590 (finger pull or dust cover) customer need to order a separate flat gasket 297002 to maintain

Optimisé par
SolidComponentsTM
Configurations?
Inconnu
Téléchargements
27
Ajouté le
13 oct., 2010
Fournisseur
Description
Logo plate for all latches and handles with cut-out Combi. The plate can be supplied in any colour and with your company logotype.


Note:
Special cut-out (see drawing) and add 4 mm to the H-dimension of the cam, to compensate for plate thickness.

MATERIAL:
Glass fibre reinforced polyamide (PA6), black.
Optimisé par
SolidComponentsTM
Configurations?
Inconnu
Téléchargements
3
Ajouté le
13 oct., 2010
Fournisseur
Description
Rod guide supplied with polyamide bushing, for Ø8 or Ø10 mm round rods.

For screw-/or weld-on mounting. Polyamide bushing for low friction and silent movement of the rod.

NOTE:
A is the distance between the inside face of the door and the rod.

MATERIAL:
Bracket: Steel, zinc plated.
Bushing: Glass fibre reinforced polyamide (PA6), black.
Optimisé par
SolidComponentsTM
Configurations?
Inconnu
Téléchargements
17
Ajouté le
13 oct., 2010
Fournisseur
Description
Rod guides with cast-in M6 nut, for round 8 mm rod. For weld-on stud or screw. The opening allows the flat end through the rod guide.


MATERIAL:
Glass fibre reinforced polyamide (PA6), black.
Nut: Steel, zinc plated.
Optimisé par
SolidComponentsTM
Configurations?
Inconnu
Téléchargements
10
Ajouté le
13 oct., 2010
Fournisseur
Description
Round Ø8 mm rod with 25 mm roller, for handles and latches with multi-point cams.

Rod model R is used with a rod adapter. The length L is the total length to the end of the roller. The adapter adds 14 mm to the total length (see drawing). Rod model R-L has an stamped, flat end with an eye. The length L is the total length from the center of the eye to the end of the roller. Special lengths on request.

MATERIAL:
R
Optimisé par
SolidComponentsTM
Configurations?
Inconnu
Téléchargements
8
Ajouté le
13 oct., 2010
Fournisseur
Description
Round Ø8 mm rod with 15 mm roller, for handles and latches with multi-point cams.

Rod model R is used with a rod adapter. The length L is the total length to the end of the roller. The adapter adds 14 mm to the total length (see drawing). Rod model R-L has an stamped, flat end with an eye. The length L is the total length from the center of the eye to the end of the roller. Special lengths on request.

MATERIAL:
R
Optimisé par
SolidComponentsTM
Configurations?
Inconnu
Téléchargements
19
Ajouté le
13 oct., 2010
Fournisseur
Description
Round Ø8 mm rod with stamped, flat end and eye. For handles and latches with multi-point cams. The length L is the total length from the center of the eye to the end of the rod.

NOTE:
Type P has a straight end.
Type S-L has a pointed end.

MATERIAL:
Steel, zinc plated
Optimisé par
SolidComponentsTM
Configurations?
Inconnu
Téléchargements
9
Ajouté le
13 oct., 2010

Coordonnées du contact

Adresse:
Svedjegatan 1
Box 214
Nässjö, 571 23
Sweden
Téléphone: 010-130 75 00
Télécopie: 010-130 75 92
site Web: www.industrilas.com