Karcher

Cable holder for ironing board AB 1000.

Gainta

G900B CLIP — kit, clip and screws, for fastening to the belt in black, made of durable ABS plastic.

CJSC Energomash

Relay 413.3787 4-contact normally open is designed for switching DC electrical circuits. Can be used on cars of any brand with 12/24V on-board voltage. Rated switching current: 60/30A. Maximum switching current: 70/40A. Current consumption: 100mA. Weight, no more than 0.045 kg. Overall dimensions: 58x33x29mm.TU 27.12.24-002-44378337-2022.

Smartmodule

SCV0050-ADJ-XX is a switching voltage regulator designed for installation in various electronic devices with adjustable output voltage. The stabilizer operates in pulse mode and has high efficiency. Can be used as a stabilizer with a fixed voltage when installing a constant resistor. Efficiency at Uin = 25 V, Uout = 12 V, Iout = 3 A: 93%. Operating temperature range: -20...+85° C. Polarity reversal protection: no. Module dimensions; 27.5x24x5.3 mm. Module weight: 3.5 g.

Dragon City

Power connector IEC-320 C8 220V/2.5A 2-pin "plug" on the panel, fastening with 2 screws (distance between centers of holes H=26.8 mm), 3 solder outputs (with switch) for audio equipment, etc.

Jietong Switch

Universal automotive limit switch. The main purpose is alarm systems. Operating voltage 12 volts. Maximum switching current 20 A.Contact resistance 50 mOhm.The insulator resistance is 100 MOhm.Electrical strength 1500 volts (1 min)Operating temperature range -25...+85 degrees C.Number of switching cycles 10000.

Nidec

Rotary selector switch CS-4 series (SMD). 1 pole. 3 contacts. Contact timing: non-shorting. Shape of terminal: gull wing.

Lite-on Electronics

Photointerrupter optoelectronic sensor (slot). THT. Slot width 6mm. Phototransistor Output. Operating temperature -25...85°C.Supply voltage 1.2V DC.

Vishay Semiconductors

The PowerTab package has been designed to fill the gap in the market between the TO-247, more expensive metal case devices and non-isolated power modules. It is the natural replacement for metal case outlines such as DO-203AA and DO-203AB, but it is also suitable for new innovative solutions, thanks to a package outline that combines low profile, excellent die to footprint ratio and sturdy connectivity. It utilises a large lead for high current connection, carrying both a mounting hole and PCB insertion pins. The body is compatible with a TO-218 outline, with an exposed heatsink and non-isolated mounting hole.*Outline conform to JEDEC® TO-275 except cathode plate width. The cathode is a short contact, the anode is a long one (datasheet).

JSC "Plant "MARS"

KT-9 - metal-glass transistor housing for semiconductor devices, manufactured in the USSR and Russia. It is analogous to TO-3 (Transistor Outline Package, Case Style 3).