VEX Robotics

Modèles deVEX Robotics Catalog
Résultats 1-10 sur 265
< Page précédente12345...27Page suivante >
Résultats par page:
Fournisseur
Description
Solenoids and manifold bases designed for use with pneumatic systems on FRC and other large scale robots. 12V solenoid valve includes connectors and wires. 4 different manifold sizes available. Base mounts include input fittings.
Configurations?
Non
Téléchargements
14
Ajouté le
24 juil., 2015
Fournisseur
Description
Solenoids and manifold bases designed for use with pneumatic systems on FRC and other large scale robots. 12V solenoid valve includes connectors and wires. 4 different manifold sizes available. Base mounts include input fittings.
Configurations?
Non
Téléchargements
36
Ajouté le
24 juil., 2015
Fournisseur
Description
Solenoids and manifold bases designed for use with pneumatic systems on FRC and other large scale robots. 12V solenoid valve includes connectors and wires. 4 different manifold sizes available. Base mounts include input fittings.
Configurations?
Non
Téléchargements
12
Ajouté le
24 juil., 2015
Fournisseur
Description
Solenoids and manifold bases designed for use with pneumatic systems on FRC and other large scale robots. 12V solenoid valve includes connectors and wires. 4 different manifold sizes available. Base mounts include input fittings.
Configurations?
Non
Téléchargements
38
Ajouté le
24 juil., 2015
Fournisseur
Description
The Pneumatic Control Module from Cross the Road Electronics provides an easy all-in-one interface for pneumatic components. Includes compressor control (replaces a Spike H-Bridge Relay). All commands run through CAN Bus. Designed to work with the roboRIO FRC control system.
Configurations?
Non
Téléchargements
75
Ajouté le
24 juil., 2015
Fournisseur
Description
The Power Distribution Panel (PDP) from Cross the Road Electronics is the latest DC power interface for competition robotics. The PDP uses CAN to connect directly to the roboRIO and allows for individual current monitoring on each channel. (8) 40A and (8) 20/30A channels. Individual protection for the roboRIO and VRM/PCM. Designed to work with the roboRIO FRC control system.
Configurations?
Non
Téléchargements
182
Ajouté le
24 juil., 2015
Fournisseur
Description
The VersaFrame is a construction system that allows teams to build an upper frame in whatever configuration they can imagine. Pre-drilled holes on a standard 1" pitch are designed to be used with #8 screws and 5/32" rivets, and can be easily drilled out for larger hardware. No need for precision fabrication capability - with just a saw and a drill, any team can build light-weight world-class frames. VersaFrame gussets provide for connections in many different configurations. In addition to a variety of angles commonly used in mechanical design, custom bearing and motor mounting gussets allow for seamless integration into designs incorporating rollers or other motion elements.
Configurations?
Non
Téléchargements
15
Ajouté le
24 juil., 2015
Fournisseur
Description
The Voltage Regulator Module from Cross the Road Electronics provides access to different constant voltages for custom sensors
Configurations?
Non
Téléchargements
83
Ajouté le
24 juil., 2015
Fournisseur
Description
Connects two sections of 1/2” Hex together. Clamping design provides axial retention of both shafts, while providing high torque transfer capability. Clamped together with (8x) $4-40 x 0.375" Socket Head Bolts. Allows for 3/4" of engagement from each shaft. Use included holes to pin each side in place. Flats on each side allow for the use of a wrench to turn the coupled shafts.
Configurations?
Non
Téléchargements
26
Ajouté le
16 juil., 2015
Fournisseur
Description
ThunderHex Stock & Bearings will revolutionize the ways teams use hex shaft. ThunderHex Stock works in all applications where 1/2" Hex Shaft will work and also includes rounded corners. These rounded corners allow the shaft to pilot inside a 13.75 mm round (ThunderHex) Bearing instead of a standard 1/2" Hex Bearing. This eliminates some difficult manufacturing tolerances and results in a MUCH smoother end result. Simply put, ThunderHex Bearings are the best way to create smooth-running hex shafts, and ThunderHex Stock helps you accomplish this without a lathe. Also, since you're essentially putting a round peg in a round hole, no more struggling to align the hex of your shaft with the hex hole of your bearing. All ThunderHex Stock also includes a subtle but very useful feature: a 0.201" hole through the center. This hole provides a clearance fit for a #10 bolt or can be tapped for 1/4-20 bolts. This means that you no longer need a precision lathe to create custom-length, high-strength standoffs; simply cut the ThunderHex shaft to size and tap it with a 1/4-20 (or 1/4-28) thread.
Configurations?
Non
Téléchargements
22
Ajouté le
16 juil., 2015

Coordonnées du contact

Adresse:
1519 Interstate 30 West
Greenville, 75402
Texas, United States
Téléphone: 19034530802
Courrier électronique:
site Web: http://www.vexrobotics.co...