Kelco Catalogue

Modèles deKelco Catalogue Catalog
Résultats 1-8 sur 8
< Page précédente1Page suivante >
Résultats par page:
Numéro de pièce
Fournisseur
Description
The L Series side entry level switch provides a reliable accurate and low cost solution to tank level control. Theswitch is available in all thermoplastic construction or in a combination of 316 Stainless Steel and Polypropylene.The level switch can be supplied with a 500 Volt rated single pole double throw micro switch for general controlcircuit use or with a S.P.D.T reed switch for low voltage low current applications. The L Series level switch isbuilt tough to give a long reliable service life in the most arduous applications.
Configurations?
Non
Téléchargements
21
Ajouté le
14 déc., 2016
Numéro de pièce
Fournisseur
Description
The P25 inline flow switch is a rugged versatile all position mounting flow actuated switch that can detect the flow of liquids in 15mm (1/2”) to 25mm (1”) diameter pipes. The P25 can be used in larger pipe systems provided the maximum flow does not exceed 100 litres per minute. The switch can detect very low flows and yet has a low head loss high flow through rating. It can be used to detect continuous or pulsed flows.
Configurations?
Non
Téléchargements
10
Ajouté le
19 juin, 2016
Numéro de pièce
Fournisseur
Description
The P25 inline flow switch is a rugged versatile all position mounting flow actuated switch that can detect the flow of liquids in 15mm (1/2”) to 25mm (1”) diameter pipes. The P25 can be used in larger pipe systems provided the maximum flow does not exceed 100 litres per minute. The switch can detect very low flows and yet has a low head loss high flow through rating. It can be used to detect continuous or pulsed flows.
Configurations?
Non
Téléchargements
8
Ajouté le
19 juin, 2016
Numéro de pièce
Fournisseur
Description
The P25 inline flow switch is a rugged versatile all position mounting flow actuated switch that can detect the flow of liquids in 15mm (1/2”) to 25mm (1”) diameter pipes. The P25 can be used in larger pipe systems provided the maximum flow does not exceed 100 litres per minute. The switch can detect very low flows and yet has a low head loss high flow through rating. It can be used to detect continuous or pulsed flows.
Configurations?
Non
Téléchargements
17
Ajouté le
19 juin, 2016
Numéro de pièce
Fournisseur
Description
Advanced Pump Controller
Configurations?
Non
Téléchargements
13
Ajouté le
25 mai, 2016
Numéro de pièce
Fournisseur
Description
The F Series flow switch is a tough but highly sensitive paddle flow switch suitable for a wide range of flow control applications in both hot and cold liquids. The electrical housing of the switch is a separate assembly and locks onto the wet end of the switch. It can be easily and safely removed for servicing, without disturbing electrical wiring. This unique feature, and the inclusion of a built in manual override make the F Series a very versatile flow switch. In addition to the standard microswitch models the F Series is available fitted with reed switches for PLC, relay logic and telemetry applications
Configurations?
Non
Téléchargements
63
Ajouté le
17 mai, 2016
Fournisseur
Description
The D30 two position top entry level switch operates on the principle of displacement. When non floating solid polypropylene displacers, suspended from the switch, are immersed in liquid their weight is reduced by an amount equal to the weight of the liquid they displace, This weight change is detected and used to actuate a magnetically isolated switch. Surface agitation, froth, floating or submerged solids do not effect the action of the D30 switch. The displacement principle depends on the specific gravity of the liquid in which the displacers are suspended. The switch is set to operate in water, at a specific gravity of 1+/- 5%.
Configurations?
Non
Téléchargements
21
Ajouté le
24 mai, 2016
Fournisseur
Description
The D30 two position top entry level switch operates on the principle of displacement. When non floating solid polypropylene displacers, suspended from the switch, are immersed in liquid their weight is reduced by an amount equal to the weight of the liquid they displace, This weight change is detected and used to actuate a magnetically isolated switch. Surface agitation, froth, floating or submerged solids do not effect the action of the D30 switch. The displacement principle depends on the specific gravity of the liquid in which the displacers are suspended. The switch is set to operate in water, at a specific gravity of 1+/- 5%.
Configurations?
Non
Téléchargements
5
Ajouté le
24 mai, 2016

A propos de

Established in 1974, Kelco Engineering operates from two large well equipped factories in Brookvale, Sydney Australia. Our facility consists of a modern toolroom equipped with the latest CNC machinery, for die and mould production. In addition we operate comprehensive manufacturing, including in hou...
Plus...

Coordonnées du contact

Adresse:
9 / 9 Powells Road
Brookvale, 2100
New South Wales, Australia
Téléphone: +61299056425
Télécopie: +61299056420
Courrier électronique:
site Web: http://www.kelco.com.au/m...